Table 1: Camera part descriptions
No
Name
Description
1
Dome Cover
The upper dome-shape cover provides protection
2
Lens
The proprietary fisheye lens provides wide
hemispheric view
3
Microphone vent
The hole for built-in microphone to receive audio
input
4
SD Card cover
Unscrew the two screws to remove the cover and
access the SD card cover.
5
Pre-Fitted RJ45
cable
Insert an Ethernet cable into the PoE port on the
RJ45 cable.
6
Cable side entry
cap
Cable route when using the cable side entry cap
7
Mounting screws
These three screws attach the camera to the flat
bracket
8
Security lock
The security lock ensures that the camera is
mounted securely onto the flat bracket.
9
Safety wire screw
Remove this screw and
insert it into the ‘loop’ on
the safety wire, then securely attach the screw
back into the camera.
10
Side cap screw
Remove this screw when using the cable side
entry cap.
11
Waterproof rubber
plug
Allows multiple cables to be threaded through the
each of the two plugs to ensure waterproof
protection.
12
Rear cap cover
Remove the three screws to open the rear cap to
access the camera buttons and connections
Security
Q
uick
S
tart
G
uide
(A163818NN2_B)
Illustra Pro Gen4 12MP Fisheye camera
(P/N IPS12-F27-OIA4)
In the box
•
1 x Illustra Pro Gen4 12MP Fisheye Camera
•
1 x Flat bracket
•
1 x Safety wire
•
4 x Tapping screws and 4 x Plastic anchors
•
1 x Torx wrench
•
1 x 2 pin terminal block
•
1 x 8 pin terminal block
•
1 x Printed Quick Start Guide
•
1 x Mounting template sticker
•
1 x Mounting thread screw
•
1 x Waterproof rubber
•
4 x Standoffs (for use with the wall mount accessory)
•
4 x Phillips screws (for use with the wall mount accessory)
•
1 x Plastic adaptor plate (for use with the pendant cap accessory)
•
2 x M4 screws (for use with the pendant cap accessory)
•
4 x Phillips screws (for use with the pendant cap accessory)
Installation tools
•
1 x Screwdriver
•
1 x Torx wrench
•
1 x Drill
•
1 x Wire cutters
Quick reference
•
Default IP: 192.168.1.168 (DHCP enabled)
•
Default Username / Password: admin / admin
•
Power: IEEE 802.3af Class 3, PoE 48V DC / 11.89W
or
24V AC / 11.77W
Figure 1: Pro Gen4 12MP Fisheye rear / top-down views
Rear view
Top-down view
Figure 2: Camera parts (Top-down view)
Note:
See Table 1 for descriptions on the parts identified in Figure 3 below.
Figure 2
Figure 3: Camera parts (rear view)
Note:
See Table 1 for descriptions on the parts identified in Figure 4 below.
Figure 3
Figure 4: Camera buttons and connections
Figure 4
