INSTALLATION MANUAL
13
IN-SWINGING DOOR CONFIGURATION
*may be sold separately
Hollow Door Frame Hardware Kit Non-Concrete Filled Install Instructions
To install the bracket to a non-concrete filled steel door frame we suggest using ¼”
heavy duty toggle anchors.
Kit includes:
Tools needed:
Two ¼ Heavy Duty Flip Toggle
Drill with ½ steel bit
Two ¼ x 1.5 inch hex head bolts 7/16 socket
Two ¼ fender
washers
Instead of drilling a 3/8 inch pilot hole, as indicated in the concrete frame filled
instructions, you will need to drill a ½ inch hole. Feed the toggle bracket through the
lock bracket first, then through the hole in the frame, one side at a time.
Be sure the LockDown Bracket is lined up as described in the install template
instructions and tighten bolts.