INSTALLATION MANUAL
15
Personal Security
IQ Lockdown only works as well as its user. Taking personal responsibility for your own safety is very important
to make IQ Lockdown work for you. Our product can’t prevent you from sending a guest pass to the wrong
person. IQ Lockdown can’t prevent your phone from being stolen and cannot keep your password secure.
Being proactive and responsible is the best way to protect you and your facility.
Layered Security
The IQ Lockdown is a layered security device. We advise customers to use IQ Lockdown as a supplemental layer
in their security. Relying on a single device or component will lessen the security of your school or business. IQ
Lockdown should be part of a larger security system. It is not a total solution. We suggest using video cameras,
motion sensors, alarm monitoring, and vibration sensors.
Z-WAVE Range
IQ Lockdown uses Z-Wave wireless technology to communicate to its control devices like the Smartphone App,
and Hub. Z-WAVE has a theoretical range of 100m (328 ft), but that is all dependent on the environment. If any
object is between the controller and the lock, the effective range of the Z-WAVE signal will drop. When you use
Z-WAVE, you should assume the effective range is 50 meters (160 ft.)
GENERAL NOTES ON IQ Lockdown
DISCLAIMER
Use of this guide at your own risk. HavenLock Inc and its parent or partner companies are not liable for any
damages to property or bodily injuries that occur during or after installation. HavenLock Inc assumes no
responsibility in providing the correct tools and accessories needed for installation unless otherwise noted. Use
proper protective gear when completing the steps detailed in this guide. This guide is simply suggestive and not
in any way authoritative. Always use your own best judgment. Incorrect installation or lack of safety precautions
can lead to serious injury or death for you or anyone around the installation area. If you are not comfortable
installing IQ Lockdown, we advise you to seek out a professional skilled worker with construction experience to
assist you.
•
Thread the wiring harness (Z) through your installed grommet before any accessory connection.
•
Use proper conduit and flex joints across the door hinges to securely route the wire to your
accessory mounting location.
•
If you need to lengthen the cable consider these options.
•
Cut the harness (Z) to a few inches past the male connector (W) and splice in your own
wiring cables inside the lockdown unit. There is room for an approved electrical
terminal block and/or small enclosure, if necessary. DO NOT cut the female side of the
wiring harness before the connector (W). This ensures that you have the option to
update the wiring harness in the future by replacing the male side of the harness (Z).
•
Wire the harness (Z) out of the lockdown enclosure as normal. Splice your own cable
inside your own electrical box or inside one of the accessories, which often have room
enough for wire splicing.
•
Strip the necessary wires of the harness according to the wiring diagram of the accessory.
•
Connect the accessory to the proper wires, ensuring a strong connection.
•
Install strain relief inside the accessory as needed.
•
Double check your wiring harness from inside the unit to the accessory(ies).
•
After all other connections have been made, complete the connection at connector (W) by pushing
together the keyed connector and screwing down the threaded lock-nut for a solid
mechanical connection.
•
Test all accessories
•
Replace the lockdown cover.