M9000-310 and M9000-320 Series Weather Shield Enclosures Installation Instructions
2
Parts Included
Table 1: Parts Included in M9000-310 and M9000-320 Weather Shield Enclosure Kits
Quantity
Description
1
Enclosure Base and Seal Assembly
1
Cover and Gasket
4
Cover Screws
2
Mounting Brackets
8
No. 12-24 x 1/2 in. Hex-Head Screws with Nitrile Patch
1
Anti-Rotation Bracket
2
M3 x 8 mm Phillips Screws
2
M4 Washers
2
Strain Relief Conduit Fittings with 1/2 in. National Pipe Straight Mechanical (NPSM) Exit
1
1
Cap Plug
2
Threaded Hex Nuts
1
Appliance Cord - 6 Conductor, 18 AWG Wire Gauge, 43 in. (109 cm)
1
Shaft Extender with Set Screw (M9000-320 Kit Only)
1.
It is recommended that 1/2 in. liquid-tight conduit and 1/2 in. National Pipe Thread (NPT) liquid-tight fittings (purchased
locally) be used to terminate the control wiring to the weather shield enclosure strain relief conduit fittings.
Mounting
Brackets
No. 12-24 x 1/2 in.
Hex-Head Screws
(Eight Locations)
Threaded
Hex Nuts
Enclosure Base and
Seal Assembly
Cover Screws
(Four Locations)
Cover and
Gasket
Strain Relief
Conduit Fittings
(Two Locations)
Anti-Rotation
Bracket
M3 x 8 mm
Phillips Screws and
M4 Washers (Two Locations)
F
IG
:p
rt
s_
in
cl
Figure 1: Parts Included in M9000-310 and M9000-320 Weather Shield Enclosure Kits (See Table 1)
