for the most up-to-date version of this document.
TE-6800 Series Temperature Sensors Installation Instructions
1
Applications
The TE-68xx-xN00S Series provides temperature
sensing in room wall mount applications. It allows local
setpoint temperature adjustment and temporary
occupancy override.
A warmer/cooler dial is included on certain models for
minor temperature adjustments from the setpoint. An
occupancy override button allows the user to request a
time-of-day scheduling override when the space is
occupied outside of the normal occupied hours
schedule. All sensors have DIP switches that enable or
disable unit functions.
Depending on the model chosen, the wires connecting
the sensor to the controller can be terminated using a
screw terminal block or modular jack connection,
offering wiring flexibility. All models include a Zone Bus
access port for connecting accessories to access the
6-pin modular jack. This feature allows a technician to
commission or service the controller via the sensor.
Installation
Special Tools Needed
A 1/16 in. (1.5 mm) hex wrench or a
Johnson Controls® T-4000-119 hex-head adjustment
tool is required during installation.
Accessories
To install the TE-6800 Series Temperature Sensor on
a wallbox requires accessory NS-WALLPLATE-0,
ordered separately.
IMPORTANT:
The TE-6800 Series Temperature
Sensor is intended to provide an input to equipment
under normal operating conditions. Where failure or
malfunction of the sensor could lead to personal
injury or property damage to the controlled
equipment or other property, additional precautions
must be designed into the control system.
Incorporate and maintain other devices, such as
supervisory or alarm systems or safety or limit
controls, intended to warn of or protect against
failure or malfunction of the sensor.
IMPORTANT :
Le TE-6800 Series Temperature
Sensor est destiné à transmettre des données
entrantes à un équipement dans des conditions
normales de fonctionnement. Lorsqu'une défaillance
ou un dysfonctionnement du sensor risque de
provoquer des blessures ou d'endommager
l'équipement contrôlé ou un autre équipement, la
conception du système de contrôle doit intégrer des
dispositifs de protection supplémentaires. Veiller
dans ce cas à intégrer de façon permanente
d'autres dispositifs, tels que des systèmes de
supervision ou d'alarme, ou des dispositifs de
sécurité ou de limitation, ayant une fonction
d'avertissement ou de protection en cas de
défaillance ou de dysfonctionnement du sensor.
TE-6800 Series Temperature Sensors
Installation Instructions
TE-68xx-xN00S
Part No. 24-10409-1, Rev. F
Issued February 2016
2 4 - 1 0 4 0 9 - 1 , R e v . F
