Johnson Controls York R-134A, Installation Instruction

JOHNSON CONTROLS

3

FORM 160.69-N2 

ISSUE DATE: 7/31/2015

MANUAL DESCRIPTION

FORM NUMBER

Product Drawing

160.69-PA5.1

YD Unit Field Reassembly Instructions

160.69-NM3

Field Connections

160.69-PW1

Unit Wiring and Field Control Modifications

160.69-PW2

YD Unit Installation Checklist and Request for Startup Engineer

160.69-CL1

YD with OptiView Control Center and EMS (Cooling Only) Operating Manual

160.69-O2

All Products - Service Policy

50.15-NM

CHANGEABILITY OF THIS DOCUMENT

In complying with Johnson Controls’ policy for con-

tinuous product improvement, the information con-

tained in this document is subject to change without 

notice. Johnson Controls makes no commitment to 

update or provide current information automatically 

to the manual or product owner. Updated manuals, if 

applicable, can be obtained by contacting the nearest 

Johnson Controls Service office or accessing the John-

son Controls QuickLIT website at 

http://cgproducts.

johnsoncontrols.com

.

It is the responsibility of rigging, lifting, and operating/ 

service personnel to verify the applicability of these 

documents to the equipment. If there is any question 

regarding the applicability of these documents, rig-

ging, lifting, and operating/service personnel should 

verify whether the equipment has been modified and 

if current literature is available from the owner of the 

equipment prior to performing any work on the chiller.

CHANGE BARS

Revisions made to this document are indicated with a 

line along the left or right hand column in the area the 

revision was made. These revisions are to technical in-

formation and any other changes in spelling, grammar 

or formatting are not included.

ASSOCIATED LITERATURE