JOHNSON CONTROLS
3
FORM 160.77-O1
ISSUE DATE: 10/22/2020
CHANGEABILITY OF THIS DOCUMENT
In complying with Johnson Controls’ policy for contin-
uous product improvement, the information contained
in this document is subject to change without notice.
Johnson Controls makes no commitment to update
or provide current information automatically to the
manual or product owner. Updated manuals, if appli-
cable, can be obtained by contacting the nearest John-
son Controls Service office or accessing the Johnson
Controls Knowledge Exchange website at
https://docs-
johnsoncontrols-uat.fluidtopics.net/chillers/home
.
It is the responsibility of rigging, lifting, and operating/
service personnel to verify the applicability of these
documents to the equipment. If there is any question
regarding the applicability of these documents, rig-
ging, lifting, and operating/service personnel should
verify whether the equipment has been modified and
if current literature is available from the owner of the
equipment prior to performing any work on the chiller.
ASSOCIATED LITERATURE
MANUAL DESCRIPTION
FORM NUMBER
YKEP Installation & Re-assembly
160.77-N1
YKEP Unit Operation & Maintenance
160.77-O1
YKEP Control Center Operation
160.77-O2
YKEP Unit & Control Panel Renewal Parts
160.77-RP1
YKEP Installation Checklist
160.77-CL1
YKEP Startup Checklist
160.77-CL2
YKEP Wiring Diagram - Field Connections
160.77-PW1
YKEP Wiring Diagram - Unit Wiring and Field Control Modification
160.77-PW2
Liquid Cooled Solid State Starter - Operation
160.00-O2
Medium Voltage Variable Speed Drive (2300v - 6600v) - Operation
160.00-O6
Medium Voltage Variable Speed Drive (10,000v - 13,800v) - Operation
160.00-O8
Unit Mounted Medium Voltage Solid State Starter (2300v - 4160v) - Operation
160.00-O7
Long-Term Storage Requirements - General
50.20-NM1
Long-Term Storage Requirements - Field Preparation
50.20-NM5
Long-Term Storage - Periodic Checklist and Logs
50.20-CL5
LD15116
AFFECTED PAGES
DESCRIPTION
4
Conditioned Based Maintenance information added
REVISION NOTES
Revisions made to this document are indicated in the following table. These revisions are to technical information,
and any other changes in spelling, grammar, or formatting are not included.
