15
ibwellness.com
14
2.0
Chair Manual
1. Switch power supply on
FUSE:
T5AL 250V
POWER INPUT
CONTROLLER JACK
ON/OF F
2. To start the massage
1. Press “Power” button to start massage.
2. Calf rest and back rest will automatically lrecline to the default position
waiting for you to choose the desired massage function (6 kinds of
automatic mode and back heating), if no button is pressed the chair will
turn off after 3 minutes.
3. After choosing an automatic course the body scan function will begin and
measure the length and curvature of your spine, upon completion of the
scan the massage will begin.
4.
At the end of the body scan you can customize the scan by hitting the
roller position up or down. There are 10 levels of shoulder adjustment,
adjust up if you want it to always go higher, adjust down if you always want
it lower. If there is no adjustment in 10 seconds, then the massage will
begin automatically.
Button
Description
Display
ROLLE
R
Adjust the position of the massage balls
upward to a suitable shoulder position.
Adjust the position of the massage balls
downward to up to a suitable shoulder
position.
Shoulde r
adjus t
High shoulder position
Suitable shoulder position
Low shoulder position
During the testing of the shoulder position you will hear a “di-di-di”
notification tone. You can adjust the shoulder position by pressing up or
down buttons according to your height on a small scale.
Method of Usage
Method of Usage
1. Liquid Crystal Display:
Displays what the chair is doing
2. Zero Gravity Button:
You have three zero gravity recline positions
3. Legrest Adjustment Button:
Elevate or lower the legrest angle
4. Foot Bottom Roller Button:
Turn on/off the bottom of the foot roller
massage function
5. Automatic Massage Buttons:
Various massage programs to deliver the
relief you desire
6. Pause Button:
Pause all functions
7. +5 Button:
Add 5 minutes to the massage program
8. Air Region Button:
Turn on/off air pressure massage function by region,
each press changes a region
9. Massage Width Button:
Adjusts width of massage for select techniques in
manual mode (Whole or point)
10. Whole Button:
Manual back massage control for the whole body, each
button press changes to a different massage technique
11. Power Button:
Switch on or off all massage functions
12. Massage Balls Position Button:
Manual adjust the massage hands in the
manual modes (whole or point)
13. Backrest Adjustment Button:
Incline or Recline the backrest angle
14. Heating Button:
Turn on/off heating massage function
15. Massage Speed Button:
Increase or decrease the massage hands speed
16. Air Pressure Intensity Button:
Increase or decrease the compression
strength (3 levels)
17. Fixed Point Button:
Manual back massage control that stays in a fixed
point, each button press changes to a different massage technique
Diagram of plug in
Diagram of the switch position of power supply
