background image

This Owner’s Manual describes the functions of the following product:

Johnson Fitness Treadmills – T8000E

See Product "Specifications" (Page 39) in this manual for product specific features, the 
Johnson Treadmill T8000E is intended for commercial use. 

It is recommended that all users of Johnson Fitness exercise equipment should be 

informed of the following information prior to its use.

When using the Johnson Treadmill, always follow basic precautions:

• To ensure your safety and to protect the unit, read all the instructions before assembling

     and using the treadmill.

• To ensure the proper use and safety of the treadmill, make sure that all users read this 

    manual. Please make this manual a part of your facility’s training program.

    Remind the users that before undertaking any fitness programme, they should obtain

    complete physical examinations from their physicians. If, at any time while exercising,

    the user experiences dizziness, pain, or shortness of breath, nausea or feels faint he or

    she must stop immediately.

   
   

SAVE THIS OWNER’S MANUAL FOR FUTURE REFERENCE.

INSTRUCTION

READ AND SAVE ALL INSTRUCTIONS before assembling or using this Johnson 

Treadmill.

 It is strongly recommended to take the following safety instructions.

• 

DANGER:

 To reduce the risk of electrical shock, always unplug the Johnson Treadmill 

    before cleaning or attempting any maintenance activity.

• 

WARNING:

 To reduce the risk of burns, fire, electric shock, or injury, it is imperative to

    connect each product to a properly grounded electrical outlet.

• 

CAUTION:

 If you experience chest pains, nausea, dizziness or shortness of breath, stop

    exercising immediately and consult your physician before continuing.

• Never operate the treadmill if it has a damaged power cord or electrical plug, if it is not

    working properly, or if it has been damaged or immersed in water. Return the treadmill 

    to Johnson Fitness or authorized dealers for examination and repair.

• Keep the power cord away from heated surfaces. Do not pull the equipment by the power

    cord or use the cord as a handle. Never place the power cord under carpeting or place

    any object on top of the power cord. 

• Only use the power cord provided with your Johnson Treadmill. If the power cord is

    damaged, it must be replaced by the manufacturer, an authorized service agent, or a

    a similarly qualified person to avoid a hazard.

• To disconnect, turn the switch to the off position, then remove the plug from the outlet.

    

• Use this treadmill for its intended purpose as described in this manual. Do not use

    attachments that have not been recommended by the manufacturer.

• Never drop or insert any object into any opening in the product. If an object should

    drop inside, turn off the power, unplug the power cord from the outlet, and carefully 

    retrieve it. If the item cannot be reached, contact Johnson Fitness or authorized dealers.

    

• Do not reach into, or underneath the unit or tip it on its side during operation.

• Keep hands and feet clear at all times from moving parts to avoid injury.

• Do not remove the treadmill motor cover or roller covers. Service should be performed 

    only by an authorized service technician.

• Do not use any equipment that is damaged or has worn or broken parts. Use only

    replacement parts supplied by Johnson Fitness or authorized dealers.

• Do not use the Johnson Treadmill outdoors, near swimming pools or in areas of high

    humidity. 

• Do not operate where aerosol (spray) products are being used or when oxygen is being 

    administered.

IMPORTANT SAFETY INSTRUCTIONS

03

02

J O H N S O N   T R E A D M I L L   T 8 0 0 0 E

J O H N S O N   T R E A D M I L L   T 8 0 0 0 E

All manuals and user guides at all-guides.com

Summary of Contents for T8000E






















Reviews: