6
Assembly instructions
Step 4:
First connect the two wire terminals, and then
connect the Console
(
#68
)
with the Main
Frame (#1). Insert the M6*70 screw (#70) and
OD12*ID6.5*1.5
washer (#82) into the hole,
screw the
Nut
(
#41
)
into
screw (#70). Finally,
using the S5(#80) and S10-19(#81) to lock.
Step 5:
Firstly, put the Seat Bracket
(
#3
)
into Main
Frame(#1), and then put the 6pcs M8*15
(
#69
)
and 6pcs OD20*ID8.5*1.5
(
#71
)
into the hole,
lock them with wrench S5
(
#80
)
Assembly is complete!
Please confirm if all screws are tightened