1
Installing the Outer Plate to a DeckHand 40
a. Position the DeckHand 40 Davit and Base over the
Outer Plate (Item #4) and mount the Bracket using
only the four holes that are farthest Outboard.
The two holes closest inboard are not used to install
the Bracket.
b. Take four ¼” x 1½” Stainless Steel Screws
(Item #12) and insert them from the bottom of the
Outer Plate through the DeckHand 40. Secure each
Screw with a Flat Washer (Item #14) and a Nylock
Nut (Item #20).
ITEM(S) NEEDED
#4 x 1
#14 x 4
#20 x 4
#12 x 4
1a
1b
Inboard
Inboard
Outboard
Outboard
Outboard
Outboard
Inboard
Inboard
Mounting
Mounting
Holes
Holes
Outer
Outer
Plate
Plate
DeckHand 40
DeckHand 40
Base and Davit
Base and Davit
Stainless
Stainless
Steel Screw
Steel Screw
Nylock Nut
Nylock Nut
Flat
Flat
Washer
Washer
1
a. Position the Pontoon Hand Control Bracket over the
Outer Plate (Item #4) and mount the Bracket using
only the four holes that are farthest Outboard.
The two holes closest inboard are not used to install
the Bracket.
b. Take four ¼” x 1½” Stainless Steel Screws
(Item #12) and insert them from the bottom of
the Outer Plate through the Pontoon Hand Control
Bracket. Secure each Screw with a Flat Washer
(Item #14) and a Nylock Nut (Item #20).
ITEM(S) NEEDED
#4 x 1
Installing the Outer Plate to a Pontoon Hand Control Bracket
#14 x 4
#20 x 4
#12 x 4
1a
1b
Inboard
Inboard
Outboard
Outboard
Mounting
Mounting
Holes
Holes
Outer
Outer
Plate
Plate
Pontoon
Pontoon
Hand Control
Hand Control
Bracket
Bracket
Stainless
Stainless
Steel Screw
Steel Screw
Flat
Flat
Washer
Washer
Nylock
Nylock
Nut
Nut
Outboard
Outboard
Inboard
Inboard
6 | minnkotamotors.com
©2021 Johnson Outdoors Marine Electronics, Inc.
