20
COLD AIR BLOW BUTTON
The pulsed cold air blow (A) is used to fix
the style without drying the hair.
Pressing it, with the device on, the hot air
cools and gives a better hold to the fold.
As soon as the cold air shot button (A) is
released, the appliance again creates a
flow of hot air corresponding to the pre-
viously selected level.
SECURITY SYSTEM
The appliance is equipped with an anti-
overheating device. In the event of overhe-
ating, heating is stopped and only cold air
is blown out. After cooling, the heating
automatically switches on again with the
emission of hot air again.
Always make sure that the air intakes (D)
and the air outlet (H) are not obstructed
and keep them clean from dust and hair.
CLEANING
ATTENTION: Before cleaning, turn off
the appliance and disconnect the plug
from the socket.
Cleaning appliance and accessories
Clean the hairdryer and accessories (F and
G) if necessary with a soft, damp cloth. Do
not use solvents or aggressive or abrasive
detergents. Otherwise you risk damaging
the surfaces.
Never immerse the appliance in water or
other liquid substances.
Regularly check the suction sockets of the
appliance and remove dust and accumu-
lated hair.
Cleaning the suction filter
To clean, proceed as follows:
remove the filter holder (L) by pulling it
outwards to detach it from the body of the
appliance, then also remove the filter (M).
Clean the filter holder (L) and the filter (M)
with a soft, damp cloth or with a soft bri-
stle brush. It is also possible to wash the
filter (M), using only water without adding
any detergent. Let it dry well and once it is
perfectly dry reposition the filter (M) cor-
rectly in its seat and reassemble the pres-
sure filter holder (L) on the body of the
appliance.
Never operate the hairdryer without the
filter (M) and the filter holder (L) cor-
rectly mounted, the hair can be sucked
into the appliance, damaging it.
Note: the more dust is present in the envi-
ronment where the hairdryer is used, the
greater the frequency with which the filter
holder (L) with the filter (M) must be cle-
aned.
Before using the appliance again, make
sure that all wet cleaned parts are com-
pletely dry.
STORAGE
If the hairdryer is not used, unplug it from
the socket and store the device in a dry
place, protected from dust and out of
reach of children.
N.B. : never wrap the power cord around
the appliance, but roll it loosely on itself
without bending it.
M
L