12
13
ASSEMBLY
STEp 3
A
Open
hardware bag 3
.
B
Pull
Lead wIre
through
rIghT COnSOLe
maST
. After pulling the lead wire through the
mast, the top of the
COnSOLe CabLe
should
be located at the top of the mast. Detach and
discard the lead wire.
C
With the
runnIng deCK
in the raised
position, attach the
rIghT COnSOLe
maST
to the
baSe Frame
using 4
bOLTS
(a)
, 4
SprIng waSherS (b)
and 4
FLaT
waSherS (C)
.
NOTE: Be careful not to pinch any wires
while assembling the right console mast.
BOLT (A)
20 mm
Qty: 4
SPRING WASHER (B)
15 mm
Qty: 4
FLAT WASHER (C)
15 mm
Qty: 4
HARdWARE bAG 3
CONTENTS :
BOLTS (A)
SPRING WASHERS (B)
FLAT WASHERS (C)
RIGHT CONSOLE MAST
CONSOLE CABLE
LEAD WIRE
CONSOLE CABLE
BASE FRAME
RUNNING DECK
ASSEMBLY
STEp 4
SPRING WASHER (B)
15 mm
Qty: 6
FLAT WASHER (C)
15 mm
Qty: 6
BOLT (D)
15 mm
Qty: 6
HARdWARE bAG 4
CONTENTS :
FLAT WASHERS (C)
CONSOLE MAST
CONSOLE CABLES
SPRING WASHERS (B)
BOLTS (D)
CONSOLE
ASSEMBLE
LEFT SIDE
FIRST
A
Disengage the
deCK LOCK LaTCh
with your
foot to lower the
runnIng deCK
.
B
Open
hardware bag 4
.
C
gently place the
COnSOLe
on top of the
COnSOLe maSTS
. Attach the
LeFT SIde
first
using 2
bOLTS (d)
, 2
SprIng waSherS (b)
and 2
FLaT waSherS (C)
.
D
Connect the
COnSOLe CabLeS
, carefully
tucking wires in masts to avoid damage.
E
Attach the
rIghT SIde
of the
COnSOLe
using 2
bOLTS (d)
, 2
SprIng waSherS
(b)
and 2
FLaT waSherS (C)
.
NOTE: Be careful not to pinch any wires
while assembling the masts.
