14
COMPONENTS
A) Switch
B) Regulation knob for slice thickness
C) Support wing
D) Carriage
E) Food presser
F) Blade
G) Blade fixing pivot
H) Feet with suction cup
INSTRUCTIONS FOR USE
Place the appliance on a stable surface and
make the suction cups of the feet H adhere.
IMPORTANT
Before plugging in the plug in the socket,
suitable to receive it, make sure that the
switch A is in position “O”.
Adjust the cutting thickness acting on the
knob B (+/-).
After having placed the food on the D car-
riage switch on the machine pressing the
switch A ( I ).
To obtain a good performance always
keep a regular push on the carriage avoi-
ding to press too much on the blade.
The food presser E must always be used
unless the size or shape of the piece to be
sliced does not allow you to use it.
The appliance is suitable for a functioning
time of not more than 10 minutes.
After having finished to use the appliance
always remove the plug.
CLEANING
Before starting any cleaning, stop the ap-
pliance, remove the plug from the socket
and zero the cutting thickness.
To remove the blade insert a coin in the
slot of its pivot G and unscrew turning
clockwise.
Be very careful when handling the blade.
Use a soft cloth for cleaning the machine.
You can remove and wash the food pres-
ser E.
After having cleaned the machine reas-
semble the blade blocking its pivot coun-
ter-clockwise.
