![background image](http://html1.mh-extra.com/html/johnson/c7000/c7000_service-manual_2022576039.webp)
CLEANING THE GROOVES
Frequency:
Every 3
to 4 months.
If there is any dust in the
grooves of the Poly-V belts
and pulleys, noises will be
generated during operation..
Procedure:
1
Remove the
Poly-V belts and
check the grooves
of the belt for dirt
or dust and clean
it if any.
2
Check the
grooves in the
pulley for dirt or
dust and clean it
if any.
3
Check the
grooves in the
roller pulley for
dirt or dust and
clean it if any.
Summary of Contents for C7000
