9
Upper limit is
triggered.
Tens and ones of
returned values
Hundreds of
returned value
Current speed of
motor motion
CHAPTER 3:ENGINEERING MODE INSTRUCTION
3.4 P2 Mode
Sensor testing is mainly used to test and indicate limits and counts. When operating motor in
this mode, LCD time window will display the digit returned by the sensor. When the digit exceeds
100, the carrying digit will display “massage intensity” (100~500) and “motion menu”.
LCD sensing position display window will indicate whether the limit switch is triggered.
The left figure shows that the upper limit
is reached when the selected machine core
(C0) rises.
When the upper limit light is, it means
that the machine core is unable to move
upward; when the lower limit light is on, the
machine core is unable to move downward.
The lamp signal 1 of massage intensity
represents 100, 2 represents 200, and so on.
We can tell by the above rules that the
returned value on the left figure is time
window (49) + motion menu lamp signal
(200) =249.
