11
blades coincide with the base of the pin.
Place the blade-pin assembled on the shaft
of the cup (A5)
Place the food in the cup and replace the
lid on the cup according to the instructions
described above.
Start the rotation of the blades by turning
the selector (A6).
On completion of the processing, place the
selector (A6) on the “0” position.
Turn the lid in a clockwise direction to re-
move the safety arm (C3) from the slot of
the motor base (A4).
Rest the cup on a stable surface before
completely removing the lid and retrieving
the accessory used.
Be careful when handling the blades of the
accessory used.
Remove the processed food and thoroughly
wash the accessories and cup.
ACCESSORY
(
F
)
mix, beat, amalgamate
Assemble the cup as described in the chap-
ter “Using the cut (C)”, insert the accessory
with the plastic wings for mixing, beating
and amalgamating (F) on the pin (D1) by
pushing downwards, so that the base of the
latter coincides with the base of the pin.
Position the accessory-pin assembled on
the shaft of the cup (A5)
Place the food in the cup and place the lid
on the cup according to the instructions
described above.
Only to be used for eggs, egg whites, cre-
ams, ready-made sauces, mayonnaise,
meringues. Never use this accessory (F) for
any type of soft or hard dough.
Start the rotation by turning the selector
(A6).
On completion of the processing, place the
selector (A6) on the “0” position.
Turn the lid in a clockwise direction to re-
move the safety arm (C3) from the slot of
the motor base (A4).
Rest the cup on a stable surface before
completely removing the lid and retrieving
the accessory used.
Remove the processed food and thoroughly
wash the accessories and cup.
CLEANING
IMPORTANT
: Do not wash the motor base
in water or a dishwasher, but only use a
damp cloth after disconnecting the power
cord from the electricity outlet.
IMPORTANT
: Carefully handle the blades
during cleaning since they are extremely
sharp.
Cleaning the cup, jug and accessories.
Separate the accessories from the cup and
jug. Rinse the lids, jug, cup and accessories
under running water. Dry thoroughly be-
fore replacing.
TECHNICAL DATA
230 V~ 50/60 Hz. 600 Watts
Safety lids
2 speed selector:
1, LOW speed
2, HIGH speed
“Pulse” function
MustangISTRUZIONI11-11.Qxd_Layout 1 30/05/13 10:33 Pagina 11
