Your Colonial Freestanding Bath is manufactured using Lucite
®
sanitary grade acrylic.
To maintain your bath’s high gloss finish, please follow these simple instructions:
General Cleaning
Wipe acrylic with a mild soap or detergent and lukewarm water solution, using a clean microfiber cloth. Rinse well,
wring out microfiber cloth and wipe again to remove moisture and streaking.
Deep Cleaning
Work into surface a thin, even coat of Ultra Gloss Bathroom Cleaner & Polish, using a soft cotton towel. Lightly
buff off excess residue with a dry portion of your towel.
After polishing, wipe with a clean damp microfiber cloth to completely remove excess residue and remove any electrostatic
charges which may attract dust particles.
Deep scratches can be removed with fine grit wet/dry sand paper and buffed to a shine using Ultra Gloss.
Caution
Window cleaning fluids, scouring compounds, harsh chemical cleaners, gritty cloths, leaded or ethyl gasoline or strong
solvents such as alcohol, acetone, etc. must not be used.
Do not place hot objects such as hair straighteners and curlers directly onto the surface.
Figure 2
Flexible Connector
Waste Trap
Waste Pipe
Plug & Waste
INSTALLATION and CARE GUIDE
Colonial
Clawfoof Freestanding Bath
<600
40mm pop-down
PW8 or PW8B
flexible connector
waste with 600mm
