- 21 –
wwww.johnnyvac.com
Maintenance list
The following table points out the responsible person for each program.
O=operator
T=Staff who have been trained specifically
Interval period
Responsible
person
Instruction
Procedure
Everyday
O
Rolling brush
Check the height of rolling brush
O
Side brush
Check the height of side brush
O
Filter
Check if the filter is damaged and
inspect the cleanness.
50 hours
O
Brush waterproof
tape
Check whether it is damaged or
worn.
50 hours
O
Front sealant tape
Check whether it is damaged or
worn.
50 hours
O
Rear sealant tape
Check whether it is damaged or
worn.
50 hours
O
Side sealant tape
Check whether it is damaged or
worn.
100 hours
T
Seal ring of
garbage can
Check whether it is damaged or
worn.
200 hours
T
Maintenance-free
battery electrode
and wiring
Check if the connected wire is
loose and clean the surface of
battery.
500 hours
T
Dust collecting
motor
Inspect motor brush (The first
inspection shall be done after 500
hours, then inspect once every 100
hours.)
T
Side brush motor
Inspect motor brush (The first
inspection shall be done after 500
hours, then inspect once every 100
hours.)
T
Drive assembly
Inspect motor brush (The first
inspection shall be done after 500
hours, then inspect once every 100
hours.)
T
Transmission belt
Check whether it is damaged or
worn.
Note: More frequent maintenance may be required under dusty circumstance.
