25
26
35
- 1
Shoulder harness anchor A
35
- 2
Shoulder harness anchor B
35
- 3
Slide adjuster
For larger child, use shoulder harness anchor A and the highest shoulder slots.
For smaller child, use shoulder harness anchor B and the lowest shoulder slots.
Choose a pair of proper shoulder slots. Insert the shoulder harnesses into slots in seat pad and seat back.
36
37
38
!
When changing shoulder harness slots, make sure shoulder harnesses are going through same slots in
seat pad and seat back.
Use Buckle
see images
39
Lock Buckle
Match the waist belt buckle up with the shoulder buckle and slide together
39
- 1
. Insert buckles into the
center buckle
39
- 2
. A “click” means the buckle is locked completely
39
- 3
.
Release Buckle
Press the center button to release the buckles.
Adjust Length for Harnesses
see images
40
1. Use slide adjuster to change the harness length.
40
- 1
2. Pull waist harness to tighten to proper length
40
- 2
. Press the button to loosen the waist harness.
40
- 3
Fold Highchair
see images
41
-
43
Infant Booster Operation
see images
44
-
63
!
The backrest of infant booster can not be reclined when using infant booster with chair.
47
Highchair Assembly
Please read all the instructions in this manual before assembling and using this product.
Assemble Seat
see images
1
-
20
Press the folding button to open support legs.
3
Fit the seat onto the frame
19
. An audible “click” means the seat is secured to the frame.
20
!
Please do not make the webbing which is on the back of seat clamped while attaching the seat, otherwise
the seat can not be attached completely.
19
!
Lift the seat up to be sure it is locked into place.
Assemble Tray
see images
21
-
23
Assemble Footrest
see images
24
The completely assembled highchair is shown as
25
Highchair Operation
Use Tray
see images
26
-
30
The tray can be adjusted to 4 positions.
Adjust Footrest
see images
31
The footrest can be adjusted to 3 positions.
Adjust Height for Seat
see images
32
The seat can be adjusted to 5 positions.
Adjust Recline
see images
33
The recline can be adjusted to 3 positions.
Adjust Height for Shoulder Harnesses
see images
34
-
38
Note
1. The shoulder harness must go into the slot that is even with or slightly above the shoulders.
2. In order to protect your child from falling out, after your child is placed into the seat, check whether the
shoulder harnesses are at proper height.
Please refer to the form data to use the product to avoid it falling and
cause hurting child
Minimum height of the adult chair´s backrest should be 13cm.
Recommended adult chair seat dimensions to be minimum 38cm (width)X44cm (length).
Note
1. To prevent serious injury or death from falling or sliding out, always secure child in the restraint.
2. Make sure the restraint harness is fitted correctly and the space between the harness and the
child does not exceed the thickness of an adult hand.
3. DO NOT cross the shoulder belts. This will cause pressure on child’s neck.
