15
16
Height Adjustment
for Head Support and Shoulder Harnesses
see images
17
-
19
1. Please adjust the head support
and check if the shoulder
harnesses are at the correct
height according to
17
!
When used rear facing, the
shoulder harness height must be
even with child’s shoulders.
17
2. Squeeze the head support
adjustment lever
18
, meanwhile
pull up or push down on the head
support until it snaps into one of
the 6 positions. The head support
positions are shown as
19
.
Using in the Rear Facing Mode
(Rearward Facing Mode/for Child under 18kg
/infant - 4 years old)
see images
3
-
9
!
Please install the child restraint on
the rear vehicle seat, and then put
the child in the child restraint.
see images
20
-
30
1. Press the ISOFIX adjuster button
20
-1
and pull the base back from
the vehicle seat to allow more
space for rotating the seat
.
2. Press the rotating button to rotate
for easier side loading/unloading
of the child, then rotate back to
the rear facing position.
21
&
22
3. After successfully installing the
seat and placing the child in the
seat, press the ISOFIX adjuster
buttons again while pushing the
seat back until it comes in contact
with the vehicle seat back.
23
-1
23
-2
17
18
19
1
2
20
1
2
21
23
1
2
22
