background image

3

1.0

Introduction 

1.1

Declaration

1.2

Limitation of Liability

2    Safety precautions

2.1 Warning

2.2  General Safety

2.2.1

Jolywood (Taizhou) Solar Technology Co.,Ltd.

Kaiyang Rd., Jiangyan Economic Development zone, Taizhou City, Jiangsu Province, P. R. China

www.jolywood.cn

 mkt@jolywood.cn

 +86-523-8061 2361

        This manual contains relevant information 
about the installation methods and safe operation 
of photovoltaic modules (hereinafter referred 
to as "modules") of Jolywood Solar Technology 
Co., Ltd (hereinafter referred to as "Jolywood"). 
This manual is applicable to the installation 
methods of standard PV module type JW-HD108N/P. 
The module size are 1728mm*1134mm*30mm 
and 1722mm*1134mm*30mm.This manual would 
be updated when new module introduced in the 
future. Failure to follow these safety guidelines 
may result in personal injury or death or property 
damage.

        The installer must read and understand this 
guide before installation. Any question, please 
contact our customer service department or 
our local representative for more detailed 
information. The installer must follow all safety 
precautions in this guide, local requirements, 
regulations of laws or authorized agencies 
requirements. Before installing a solar photo-
voltaic system, the installer should be familiar 
with its mechanical and electrical requirements. 
The installer required relevant professional 
knowledge, and the system must be installed 
and maintained by qualified person with 
professional knowledge.

        Before installing, wiring, operating or 
maintaining modules, you should read and 
understand all safety rules. Modules will generate 
electricity when exposed under a light source 
environment. The generate electricity from array 
of multiple modules would cause fatal electric 
shock or burns. Person without authorization and 
relevant training should not touch modules and 
wiring terminals.

        For any of the following injuries or losses, 
including but not limited to bodily injury and property
damage caused by module operation, system 
installation errors, and failure to follow the instructions
of this manual, Jolywood is not responsible for that.

        Jolywood reserves the right to change this 
installation manual without prior notice. Jolywood 
does not make any guarantee for any express or 
implied information contained in this manual. If 
customer fails to follow the requirements listed in 
this manual during the installation of the modules, 
the limited product warranty provided would be 
invalidated.

        Please store this guide in a safe place for 
future reference (maintenance), which would 
also be useful when selling or disposing of the 
modules.

        The modules of Jolywood have passed the 
tests of IEC standards in certification agencies. 
Please rest assured that you can use them under 
the premise of complying with the requirements 
of this installation manual.

        The module installer must inform the end 
customer (or consumer) of the above matters
accordingly.

Installation Manual

 - Jolywood N-type Mono-crystalline Double Glass Module

Summary of Contents for JW-HD108N

















Reviews: