Top end of cylinder
Automatic Capsule underneath
Drogue
Pouch
Horseshoe
2. Re-Arm
3. Re-Pack
b
c
d
a) Deflate the Horseshoe fully through the oral
valve.
WARNING: Do not use a high pressure vacuum
to deflate as this will damage the valve.
b) Unscrew the old Cylinder.
c) Re-arm the Operating Head and replace the
Automatic Capsule.
d) Fit the new Cylinder (38gram only).
e) The Horseshoe is now ready to pack into it’s
pouch
a) With the Automatic Inflation
system on the table, fold the
Horseshoe in half with the Oral
Inflation tube inside.
Oral Inflation
tube inside.
b) Fold the inner side of the
Horseshoe over on top to align
with the outer periphery.
c) Stow the Drogue Line inside the
Drogue
Stow the Drogue Line inside
the Drogue
d) Fold the bottom of the
Horseshoe up 20mm above the
end of the Automatic Capsule.
e) Fold the top of the Horseshoe
over twice so that it aligns with
the lower fold and the top end of
the cylinder.
f) Place the folded Horseshoe on top of the
pouch. The Inflation System is to be central
and the Automatic Capsule at the opposite
end to the handle. The Capsule is to be free
of obstructions and must protrude from the
pouch.
g) Fold the Drogue and place on top of the
folded Horseshoe
h) Attach the pouch retaining line
to the pouch handle using a
Bowline Knot. Stow any excess line
inside the pouch.
i) Bring both sides of the pouch
around the Horseshoe, Drogue
and attach the Velcro.
a
