Cape Fisherman Owner's Manual
24
© Copyright Jones Brothers Marine Manufacturing, Inc. 2008
http://www.northerntool.com
http://www.rvpartscenter.com
Use the Locking Pin
If a standard 4 way connector is plugged into the 5-way connector on the trailer, then
putting the vehicle in reverse will not power the unused reversing solenoid pin on the trailer
connector. In this case, the steel locking pin normally used to lock the coupler onto the ball
can be moved to manually lock the brake lever mechanism on the coupler.
4.2
Driving
Do not allow passengers to ride in the boat while trailering. Check the brakes prior to
leaving. Drive as smoothly as possible and try to avoid sudden jerks. Anticipate sudden
stops, and make wide turns. Road trips require occasional stops to make sure the trailer is
still secured properly. Also, periodically check the wheel bearings by touching the hubs. If a
hub is hot, the bearing is starting to fail.
If you are a new boat owner with little trailering experience, do not drive from the dealership
to a boat ramp - especially on a holiday weekend! Maneuvering a boat trailer requires some
practice. Take your boat to an open area and get accustom to backing the trailer before
attempting to launch in a confined marina. The trailer always backs in the opposite direction
of the vehicle. To maneuver the trailer, turn the steering wheel in the direction you want the
trailer to go.
Summary of Contents for Cape Fisherman
