OPERATION
47
© Copyright Jones Brothers Marine Manufacturing, Inc. 2008
5.17 Livewell
The Cape Fisherman can be optionally equipped with a livewell. Jones Brothers Marine
recommends that the livewell be installed by the factory, or qualified marine mechanic.
Filling the Livewell - To fill the livewell, plug the drain at the bottom of the livewell tank,
and then open the seacock located in the bilge. Activate the livewell switch on the console.
The livewell pump will then fill with water through the intake fitting near the bottom of the
box. The water level will rise to a point slightly below the top of the livewell and will then
drain through a screened overflow.
Note: If the seacock is left open, the forward motion of the boat can gradually fill the livewell
tank even when the livewell pump is not turned on.
Empty the Livewell - To empty the livewell, stop the boat and turn off the console livewell
switch. Close the seacock, and then unplug the drain on the bottom of the livewell. After the
livewell drains the plug can be returned to the drain to provide dry storage.
Summary of Contents for Cape Fisherman
