JS1 Jet Sustainer Flight Manual Supplement - Issue 1
Date of issue: 31.03.2016
Accepted section
Page 4–15
4.6.2. Inflight engine stop procedure
The inflight shut down procedure is as follows:
1. Reduce the Thrust to the IDLE setting. Maintain a safe airspeed
below V
PE
(140km/h or 76 kts).
2. Allow the temperatures to stabilise for at least 30 seconds.
3. Switch the Jet Control toggle switch to the “RETR” position.
4. Close the fuel valve – this will reduce the possibility of an engine
fire inside the fuselage bay.
5. After automatic cool-down, the engine will be stowed
automatically.
6. Switch the Jet Master Switch on the JDU to the “OFF” position
after the engine is retracted.
