JS1 Jet Sustainer Flight Manual Supplement - Issue 1
Date of issue: 31.03.2016
Accepted section
Page 8–6
8.5.2. Fuel configuration
8.5.2.1.
Quantity determination
The fuel configuration allows selection of
the way the fuel quantity is display during
operation.
8.5.2.2.
Maximum quantity
The maximum usable fuel quantity is adjustable in the “Maximum
quantity” box. The default setting for the JS1 is 42l (11.1 gal.).
8.5.2.3.
Max Fuel probe level
In case the fuel probe cannot read the full fuel range, the “Max Fuel
probe level” can be adjusted. This is typically the scenario in the JS1
where the fuel level in the top tank is not measured. If the fuel level
exceeds the maximum level measurable by the probe, the JDU will
display the fuel level entered manually in the “Settings” page.
8.5.2.4.
Low fuel warning
Low fuel warning is adjustable in the “Low
Fuel warning level” box. The default
setting is 5l.
