JS1 Jet Sustainer Flight Manual Supplement - Issue 1
Date of issue: 31.03.2016
Accepted section
Page 7–1
7. System description
7.1. Kinematic system
The kinematic system is driven by a 12 volt electromechanical linear
actuator with integral limit switches. The actuator is controlled by the
JDU and is used to operate the front pylon, main doors, as well as the
front finger door. The system is described in more detail in this
section.
Figure 7-1: Kinematics system
7.1.1. Front pylon
The front pylon’s movement is operated by an arm attached to the
linear actuator as shown in
Error! Reference source not found.
. The
actuator lowers and raises the pylon to which the TJ-42 Jet engine is
