3.1 LCD Menus - Using the Control Buttons on the Digital Modulator
LCD Menu - PRESS "OK" to Enter a Setting Below:
RF Menu
RF Output
PRESS "OK"
RF Output
Setup RF Output
PRESS "OK"
Country:
Australia
PRESS "OK" then PRESS "
q
" to change to the
correct Country then PRESS "OK"
RF MENU RF OUTPUT
Note: After pressing "OK" after "RF Output Setup RF Output" you can
continue to PRESS "
q
" to cycle through the main parameters
Frequency: C33
[564.500MHz]
PRESS "OK", then PRESS "
q
" "
p
" to CHANGE
the RF Frequency if required, then PRESS "OK"
Output Level:
90 dB
µ
V
PRESS "OK", then PRESS "
p
" to CHANGE and
increase the level if required, then PRESS "OK"
Carrier:
8K
PRESS "OK", then PRESS "
q
" to CHANGE to 2K
if required, then PRESS "OK"
Constellation:
QAM64
PRESS "OK", then PRESS "
q
" to CHANGE to
QAM16 if required, then PRESS "OK"
FEC:
3/4
PRESS "OK", then PRESS "
q
" to CHANGE to 1/2,
2/3, 3/4, 5/6 if required, then PRESS "OK"
Guard Interval:
1/16
PRESS "OK", then PRESS "
q
" to CHANGE to 1/4,
1/8, 1/16, 1/32 if required, then PRESS "OK"
IQ Swap:
Disable
PRESS "OK", then PRESS "
q
" to Enable if
required, then PRESS "OK"
Are you sure?
y
PRESS "OK" for "YES" or PRESS "
q
" to select "n"
[NO] if required, then PRESS "OK"
RF Output
Advanced
PRESS "OK"
Freq Offset:
No Offset
PRESS "OK", then PRESS "
q
" to select the Freq Offset [-250K, -500K, -750K and
+750K, +500K, +250K] if required, then PRESS "OK"
RF OUTPUT ADVANCED
Note: After pressing "OK" after "Freq Offset: No Offset" you can
continue to PRESS "
q
" to cycle through the main parameters
RF Output:
Enable
PRESS "OK", then PRESS "
q
" to Disable if
required, then PRESS "OK"
Single Tone:
Disable
PRESS "OK", then PRESS "
q
" to Enable if
required, then PRESS "OK"
Are you sure?
y
PRESS "OK" for "YES" or PRESS "
q
" to select "n"
[NO] if required, then PRESS "OK"
RF Output
Quick Setup
PRESS "OK"
Mod:
1
PRESS "OK" Select the MOD # 1 to 8 by PRESSING "
q
" or "
p
", then PRESS "OK".
Refer to the Channel Plan on Page 20 for the Default Frequencies for MOD # 1 to 8.
Are you sure?
y
PRESS "OK" for "YES" or PRESS "
q
" to select "n"
[NO] if required, then PRESS "OK"
RF Output
Rtrv Status
PRESS "OK"
Country:
Australia
PRESS "OK"
Frequency: C33
[564.500MHz]
PRESS "OK"
Output Level:
90 dB
µ
V
PRESS "OK"
Carrier:
8K
PRESS "OK"
Constellation:
QAM64
PRESS "OK"
FEC:
3/4
PRESS "OK"
Guard Interval:
1/16
PRESS "OK"
IQ Swap:
Disable
PRESS "OK"
Are you sure?
y
PRESS "OK" for "YES" or PRESS "
q
" to select "n" [NO] if required, then PRESS "OK"
Switch On
Boot System
Please wait...
DM/R4HDM4
564.500 MHz
= Product Code: DM/R4HDM4
= RF Output Frequency [CH 33]
FRONT PANEL BUTTONS
OPERATION
Press the "OK" button to enter or confirm a setting. Press the "BACK" button to return to a previous MENU.
Press "OK" to access MAIN MENU. Press the "
q
or
p
" to scroll up or down. Press "OK" to access a
SUBMENU. Press the "
q
" or "
p
" to scroll up or down. Press "OK" to access a Setting, then Press the "
q
or
p
" to modify the parameters. Press "
◄
or
►
" to scroll forward or backward.
RF OUTPUT
RETRIEVE STATUS
RF OUTPUT QUICK SETUP - MORE INFO ON PAGE 22
10
11
DIGITAL MODULATOR - 4 x HDMI INPUTS TO DVB-T MPEG4
CHAPTER 3: OPERATION
