23
SERVICIO Y AJUSTES
Fig. 33
IMPRESIÓN / INCLINACIÓN DE LAS RUEDAS
DELANTERAS
La impresión e inclinación de las ruedas delanteras de su nuevo
tractor vienen así de fábrica y son normales. La impresión y la in-
clinación de las ruedas delanteras no son regulables. En caso que
se produzca algún daño que afecte la impresión o la inclinación de
las ruedas delanteras tal como vinieron de fábrica, póngase en con-
tacto con un centro de servicios u otro centro de servicios autorizado.
Fig. 34
02614
BATERÍA DÉBIL
O DESCARGADA
BATERÍA COMPLET
AMENTE
CARGADA
PARA HACER ARRANCAR EL MOTOR CON
UNA BATERÍA BAJA (V
ea Fig. 34)
ADVERTENCIA: Las baterías de ácidoplo mo gen-
eran gases explosivos. Mantenga las chispas,
las llamas y los materiales para fumar alejados
de las baterías. Siempre use una protección para
los ojos alrededor de las baterías.
Si su batería está demasiado baja como para hacer arrancar el
motor tiene que volverse a cargar. (V
ea “Batería” en la sección
de Mantenimiento de este manual).
Si se usan “cables de em pal
me” para un arranque de emergen-
cia, siga este procedimiento:
IMPORTANTE
: SU TRACTOR ESTA EQUIP
ADO CON UN SISTE-
MA DE 12 VOLTS. EL OTRO VEHÍCUL
O TAMBIÉN TIENE QUE
TENER UN SISTEMA DE 12 VOLTS. NO USE L
A BA
TERÍA DE SU
TRACTOR PARA HACER ARRANCAR A OTROS VEHÍCUL
OS.
PARA ADJUNT
AR LOS CABLES DE EMP
ALME -
•
Conecte cada extremo del cable ROJO con el terminal (A-B)
POSITIVO (+) de cada batería, preocupándose de no hacer
cortocircuito en el chasis.
•
Conecte un extremo del cable NEGRO con el terminal (C)
NEGATIVO (-) de una batería completamente cargada.
•
Conecte el otro extremo del cable (D) NEGRO con un buena
CONEXIÓN A TIERRA DEL CHASIS, alejado del estanque
de combustible y de la batería.
PARA REMOVER L
AS RUEDAS (Vea Fig. 33)
•
Bloquee el eje en forma segura.
•
Remueva la cubierta del eje, el anillo de retención y las
arandelas para permitir la remoción de las ruedas (la rueda
trasera contiene una llave cuadrada - no la pierda).
•
Repare la llanta y vuélvala a montar.
AVISO
: En las ruedas traseras solamente: alinee las ranuras en
el cubo de la rueda trasera en el eje. Inserte la llave cuadrada.
•
Vuelva a colocar las arandelas e inserte el anillo de retención
en forma segura en la ranura del eje.
•
Vuelva a colocar la cubierta del eje.
AVISO
: Para arreglar las llantas perforadas y péra prevenir que
tenga llantas pinchadas a causa de pequeñas fugas, comprar de
su commerciante y utilizar el sello para llantas. Elsello previene
que las llantas se sequen y también la corrosión.
LLA
VE CUADRADA
(RUEDA TRASERA SOLAMENTE)
ARANDELAS
ANILLO DE
RETENCIÓN
CUBIERTA
DEL EJE
PARA REMOVER L
OS CABLES, INVIERTA EL ORDEN
•
El cable NEGRO primero del chasis y luego de la batería
completamente cargada.
• El cable ROJO al último de ambas baterías.
REEMPLAZAR L
A BA
TERIA (Vea Fig. 35)
ADVERTENCIA: No haga cortocircuito con los
terminales de la batería al permitir que una
llave de tuerca o cualquier otro objeto entre en
contacto con ambos terminales a la misma vez.
Antes de ins ta
lar la batería remueva las pulseras
de metal, los relojes de pulsera de metal, los
anillos, etc. El terminal positivo tiene que co-
nectarse primero para evitar las chispas debido
a la conexión a tierra por accidente.
•
Levantamos la base del asiento a la posición levantada.
•
Desconecte el cable de la batería NEGRO primero y luego
el cable de la batería ROJO y remueva la batería del tractor.
•
Instale la nueva batería con los términos en misma posición
como la batería vieja.
•
Primero, conecte el cable de la batería ROJO con el terminal
positivo (+) con el perno hexagonal y la tuerca según se
muestra. Apriételos en forma segura.
•
Conecte el cable de conexión a tierra NEGRO al terminal
negativo (-) con el perno hexagonal y la tuerca que queden.
Apriételos en forma segura.
•
Cerramos la base del asiento.
Fig. 35
CUBIERTA
TERMINAL
02603
BASE DEL
ASIENTO
CABLE NEGRO
(NEGATIVO)
CABLE ROJO
(POSITIVO)
TUERCA
PERNO