PARTS LIST NO.
PAGE NO.
REPLACES
PARTS LIST
MODEL:
BV32
530068885 -- 8/07/02
Note: Illustrations may differ from actual models due to design changes
6
530068885--9/13/01
L
SERVICE REFERENCE
530069291
530069486
9/16” or
14.3mm
3/8”or
9.5mm
1. Starter Pulley -- When ordering a new starter pulley for your unit, please measure your existing
pulley as shown by the dimensions in the illustrations below and order accordingly.
2. Crankshaft Spacer -- Earlier models equipped with the laminated crankshaft (shown on the left)
requires Spacer 530015788. Later models equipped with a step on the crankshaft (shown on the
right), do not require the spacer.
Spacer Required
Spacer Not Required
Step
3. Fan Housing Kit, Spacers, Bearing and Screws -- The earlier fan housing was equipped with
bearing (530032108), screws (530015805) and required two spacers (530029176 and 530029110) as
shown below. The new fan housing does not require a bearing and uses one long spacer
(530038386). Both sets of parts are included in the new fan housing kit 530069714.
Bearing and Two Spacers Required
One Long Spacer Required
530029176
530038386
530015805
530032108
4. Inlet Door -- The latch on the lower blower housing and door has changed. The new style can be
identified by the tab found at the top of the latch on the door and the latch prongs on the housing as
shown below. To replace the old door, order Lower Blower Fan Housing 530047736. To replace the
door equipped on the new style housing, order 530047700.
New Style
Latch
Prongs
Tab
No
Prongs
No Tab
Old Style
Ne w
Style
Old
Style
530029110
