User and Service manual JO960
Ver. 2.0
Ver. 1.1
11
Heating tip
Check of heating tip
Check regularly the following:
•
That there is no water leakage around the heating tip.
•
That the isolation is not damaged.
•
That it is not bent or in any other way damaged.
Remark: A damaged heating tip should always be changed
Changing of heating tip
1. Switch off the main switch.
2. Loosen the hexagon screws.
3. Loosen the heating tip.
4. Check that all contact surfaces are undamaged and clean
Remark: Never use any grease or fat on the contact surfaces.
Figur 4: Changing of heating tip
Hand held transformer
4 pcs Hexagon screws
Heating tip
2 pcs 8 mm O-ringar
