⑨
Cold air circulation position
⑩
LED light
●
Handle Installation
①
Open the door seal near the handle mounting hole
②
Take out the crosshead screw in the accessory bag and insert it into the
reserved handle mounting hole in the door sealing groove of the door body.
③
Align the mounting hole on the handle with the screw, tighten the screw
with a Phillips screwdriver, and fix the handle. Note that the upper and lower
fixing holes of the handle need to be tightened with screws.
④
After checking that there is no looseness of the handle after installation,
install the pulled out door seal back into the door seal groove, and arrange it
evenly.
●
Reversible door
