Doc. No.: 87634 Rev. G
jotron.com
Page 20 of 48
7
Installation
The Tron 40VDR must be installed and stored as described in this manual.
Do not install the EPIRB near strong magnetic fields,
otherwise the EPIRB may be activated.
7.1
Brackets
Brackets should be mounted in a well protect area from environmental
conditions such direct water spray, chemicals, oil, exhaust and vibrations.
7.1.1
Mounting the FB-40 float-free bracket
Refer to the Tron 40VDR FF Capsule Installation manual for steps regarding
how to complete the mounting of the FB-40 float-free bracket.
7.1.2
Mounting the EPIRB in the FB-40 float-free
bracket
To mount the Tron 40VDR in the FB-40, do the following:
1.
Verify the bracket is properly mounted.
2.
Verify the bracket is not damaged.
3.
Place the EPIRB on the docking module and gently press it into
the stability clip, verify no gapping.