99744_UM_40S_G
6
W
ARNING / IMPOR
T
ANT
Jotron Electronics a.s. is a prime manufacturer of safety equipment designed for
rescue of human lives and their property. For safety equipment to be effective in
line with the design parameters it is important that they are handled, stowed
and maintained in compliance with the manufacturers instructions. Jotron
Electronics a.s. can not be held responsible for any damage caused due to incorrect
use of the equipment or breach of laid down procedures or for failure of any
specific component or other parts of the equipment.
The chapter covering battery replacement (6.1.2) is added for information only.
Jotron Electronics a.s. does not take any responsibility for improper disassemb-
ling/assemblin of the beacon. We strongly recommend all service to be done by
authorized Jotron agents. In addition to normal service, Jotron agents have the
necessary equipment and education to test the operational functions of the beacon.
Non-original maintenance and/or service parts may destroy the equipment
function and performance.
The information in this book has been carefully checked and is believed to
be accurate. However, no responsibility is assumed for inaccuracies.
CAUTION!
This equipment contains CMOS integrated circuits. Observe handling
precautions to avoid static discharges which may damage these devices.
JOTRON electronics a.s reserves the right to make changes without
further notice to any products or modules described herein to improve
reliability, function or design. JOTRON electronic a.s does not assume any
liability arising out of the application or use of the described product.
TO PERMANENTLY DISABLE EPIRB
The battery module must be removed and treated
according to chapter 6.1.2 paragraph 1, 2, 3 and 4,
chapter 6.1.3, 6.1.4, 6.1.5 and 6.1.6 in this manual.
IMPOR
T
ANT
