Doc. No.: 85355 Rev. H
jotron.com
Page 31 of 48
8.1
Activation
1.
Pull the activation ring to activate.
2.
Ensure the switch enters the ON position.
The LED indicator starts to flash and the unit beep
regularly.
3.
Secure the Tron AIS-SART to the lifeboat/liferaft in a vertical
position and as high as possible.
4.
Both LEDs (green & red) will flash while the unit is searching to fix
a GPS position (max. 15 mins).
Figure 22 Image: LEDs ON
5.
You will hear a beep every time a transmission is made (every
min).
6.
When a successful GPS position has been fixed, the green LED
flashes.
Figure 23 Image: Green LED
7.
If no GPS position is fixed, it is indicated by a red LED flash. When
this happens, reposition and restart the unit.