22
139775_R
03
_GI 535 DV IPI June 2016
Figure 7.19. Engage pockets in the underside of Right Lower
Log #5 with the adjacent blocks on the burner base.
Figure 7.20. Engage holes in the underside of the Upper
Right Log #6 with the pegs on logs #1 and 5.
Figure 7.21.
Use a toothbrush or tweezers to lightly disburse
small tufts of ember fibers across the front of the burner base.
DO NOT PLACE EMBER FIBERS AT THE REAR OF THE BURNER BASE.
DO NOT OBSTRUCT BURNER PORTS.
5
7
6
Figure 7.22
WARNING:
FREQUENTLY INSPECT THE PILOT
AREA AND KEEP IT CLEAR OF MISPLACED LOGS
OR DEBRIS. DO NOT ALLOW ANY MATERIAL TO
OBSTRUCT PILOT CARRY-OVER PORTS.
PEG
PEG
