Quick Start Up Guide
Jetronix-Eco
8
Jovy Systems® Limited
5-
Process Profile stages Setting and Parameters
-
Process profile stages settings
-
Parameters
-
Option after finish settings
1.
Choose a Name to the process profile
2.
Choose how many stages (Controlled Preheating, 1, 2 or 3) are
required according to the application. You must fill in stages in
sequence otherwise; stage window will not be active.
3.
Set the stage’s end temperature value.
4.
If Dwell time is required according to application type in each
stage, set a number of seconds from 0 to 99.
5.
Set the Heaters power level (from 0% to 100%) for each
heating zone in each stage, or .
6.
After complete all the process profile parameters you have
three options:
a.
Run the profile by pressing Start process
b.
Save the profile to the PC
c.
Save the profile to the Machine memory
