3.
Now, mount the power supply into the case. Therefore, you have to
screw it from the bottom of the case with the big silver screws.
5.
The rest of the wiring follows. You start by wiring the switch. First,
connect the short brown cable (phase) to the switch and the
bottom connection of the power connector. From the switch,
connect another brown cable to the screw terminal of the power
supply unit (marked as L). The blue cable is connected from the
middle connection of the power connection to the N connection of
the power supply unit. The yellow
-
green cable is connected from
the top pin of the power connector to the earth terminal of the
power supply unit (marked as
).
4.
Now, connect the fan to the fan controller and the fan controller to
the power supply. Therefore, connect the black cable of the fan
control to the power supply with
one of the anticipated terminals
V
-
and the red cable with one of the V+ terminals.
