Joy-it JT-PSG9080 Flash Manual Download

Page: 1 / 5

FLASH MANUAL

PSG9080

1. GENERAL INFORMATION

Dear customer,

thank you very much for choosing our product.

In following, we will introduce you to what to observe while starting up

and using this product.

Should you encounter any unexpected problems during use, please do

not hesitate to contact us.

Only use the firmware versions published by Joy

IT to flash your JT

PSG9080.

The firmware versions published by Joy

IT are specifically adapted to

the Joy

IT JT

PSG9080 and should never be used for other devices.

Summary of Contents for JT-PSG9080

Page 1: ...observe while starting up and using this product Should you encounter any unexpected problems during use please do not hesitate to contact us Only use the firmware versions published by Joy IT to flash your JT PSG9080 The firmware versions published by Joy IT are specifically adapted to the Joy IT JT PSG9080 and should never be used for other devices ...

Page 3: ...w you can click on Run to start the firmware upgrade After the successful upgrade you will see the following on your signal ge nerator Now press any button on your signal generator to complete the installati on Your signal generator will then switch off automatically ...

Page 4: ...sted below 1 Click on Close Port 2 Switch off your PSG9080 using the switch on the back of the device 3 Use the switch again to turn the device back on 4 Click on Open Port 5 Press 1 on the keypad of your signal generator 6 Click on Run The firmware upgrade should now start ...