QuickCharge detection
The meter automatically recognizes devices with QuickCharge support.
The following QuickCharge modes are currently supported:
QC2.0. QC3.0, Apple 2.4 A / 2.1 A / 1 A / 0.5 A, Android DCP, Samsung
Recording of charging process
Voltage of
D+ (DP)
Voltage of
D- (DM)
Mode indicator
Accumulated
electrical loading
Accumulated
energy
Total
accumulation
time
Trigger current
for recording
Recording indicator
Red
: Recording paused
Green
: Recording in process
After power is turned on, if the flowing current is greater than the trigger
value, the system automatically starts recording the
accumulated electrical charge, energy and elapsed time. The „REC“ indica-
tor then changes from red to green.
To set the current trigger value, press
and hold it to
highlight the value. Press
to adjust the value accordingly.
The value can be set anywhere between 0.01 A and 0.3 A.
