www.joy
-
it.net
Pascalstr. 8 47506 Neukirchen
-
Vluyn
3.
Now put the top onto the bottom part and turn around the Rasp
-
berry Pi 4 with the case .
4.
The case must be screwed tight now. Do this at the bottom part
of the case. Thereby please note that the shorter screws must be
used on the side with the HDMI ports and the longer ones on the side
of the GPIO pins. The screws can be tightened with the help of the al
-
len key included in the scope of delivery.
