Published: 13.06.2018
Copyright by Joy-IT
9
3
10.1“ HDMI LCD
4.1 Device Connection
1. Connect the "Power Only interface" of the LCD with a 5V 2.4A adapter. This should be equipped with a
Type A to micro USB cable. (Normally the LCD will reset the output on the screen and perform a self-
test.)
2. Connect the HDMI interface of the LCD to the HDMI interface of your Raspberry Pi with an HDMI
cable.
3. Connect the touch interface of the LCD to one of the USB ports of your pi.
4. Insert a micro SD card into the card socket of the Raspberry Pi and then turn on the Pi. After a waiting
time you should see the following interface. (Now you can adjust the backlight of the LCD with the
"backlight adjustment button". See marker 1 in the following figure.
Summary of Contents for RB-LCD10
Page 1: ...3 10 1 HDMI LCD...
