- ASSEMBLY.
You will receive the item with inner system assembled in advance. What you have to do is just to
assemble the external components. A PE bag with assembling tools is available with each carton.
Unseal the bag and take the tools out. A flat and even floor is required for the main frame laying.
Make sure there is no other object sharp within 1.5m of main frame fron all direction.
2.- Rear stabilizer.
18
11
16
16
18
11
2
1
- Insert the M10*92 carriage screw (16) through
the rear stabilizer (2) and the bottom bracket of
the main frame (1), then use M10 nylon cap (18)
and M10 arc washer (11) to lock them up.
5R
5L
18
11
11
18
16
1
16
3
3.- Front stabilizer.
- Insert the M10*92 carriage screw (16) the front
stabilizer (3) and the bottom bracket of the main
frame (1), then use M10 nylon cap (18) and M10
arc washer (11) to lock them firm.
4.- Pedals
- Put the right pedal (10R) on the pedal tube (5R) and
insert M10*40 outer hexagon screw (26) through the
pedal and pedal tube. Use the M10 flat washer (31)
and pedal adjustor (75) to lock them firm.
5R
5L
31
10L
75
- Put the left pedal (10L) on the pedal tube (5L) and
insert M10*40 outer hexagon screw (26) through the
pedal and pedal tube. Use the M10 flat washer (31)
and pedal adjustor (75) to lock them firm.
75
1
31
75
31
75
10R
26
26
