background image

Joybay Swing Car meets and exceeds the highest International and US toy 

safety standards. It is CE and ASTM F963 certified.

Please follow these safety guidelines:

1. When unpacking the swing car, keep package away from children, and 

properly dispose of all plastic wrappings or any packing material before 

use.

2. Adult assembly is required. This product contains small parts, keep chil-

dren away until assembled. 

3. Read and understand this entire manual and instruct children on proper 

use of this product before allowing them to ride.

4. Never leave child unattended. Adult supervision is strongly recommend-

ed at all times.

5. Never use the swing car near pools, steps, or any other places where a 

drop may occur.

6. Never use the swing car on a hill, steep slopes or uneven, rough surfac-

es. 

7. Never use the swing car on any public street, sidewalk, or any other 

places where vehicles might be present. 

8. To avoid the possibility of falling or tipping backwards, always lean for-

ward toward the steering wheel when riding.

  SAFETY GUILDLINES

Congratulations on the purchase of your Joybay Swing Car, the easy to 

operate, fully kid powered, and special one of a kind ride-on toy!

Before the exciting riding journey begins, please make sure to read and fol-

low all safety, assembly and using guidelines. Our swing cars are designed 

to accommodate children from 3 years of age with a maximum weight 

capacity of 220 lbs, and are sure to satisfy hours of riding fun.

Summary of Contents for SWING CAR









Reviews: