Insert washer and nut. Then use
one finger to hold the bolt, and the
other hand to tighten the nut with
the hex tool until it is not moving
free. NOTE: The nut should be
slightly tightened but make sure it is
not firmly tight at this step.
Line up the front wheels with small-
er wheels facing forward as shown.
Insert steering wheel shaft into
hole in top front of swing car, with
wide part of steering wheel facing
forward as shown.
Use the included hex tool to tighten
the nut
AS TIGHT AS POSSIBLE
this time (Very important).
NOTE: insert screw-driver or other
metal object into holes on the hex
tool to help you tighten.
Insert the steering wheel cap and
enjoy the riding journey!
10
9
8
7
6
IMPORTANT
IMPORTANT
