12
Configuring the time
1-Press the TIME buttons once to enter time configuration mode. The
hour digits start flashing.
2-Press the STATUS button to decrease and SET to increase
3-Press TIME again to configure the minutes
4-Press the STATUS button to decrease and SET to increase
5-Press TIME again to confirm configuration
MEASUREMENT UNIT
To change the measurement unit, open the battery compartment and set
the small button at C° or F° (depending on which measurement unit you
wish to have on the display)
RETRIEVING STORED TEMPERATURES
To retrieve one of the 9 saved temperatures:
1-Press the STATUS button to select the memory function (the memory
icon appears on the display)
2-Press the SET button to find the saved temperature you require
TECHNICAL FEATURES
Model: JC-138G (FDIR-V8)
Temperature range 32.0 °C ~ 42.9°C
Resolution of display: 0.1°C
Precision 35.5°C ~ 42.0°C± 0.2°C others ranges ± 0.3°
Icons visualized on the display in normal conditions [from 35.5°C to 37.5°C]
Icons visualized on the display in instable conditions [from 37.6°C to 37.9°C]
Icons visualized on the display in case of fever [from 38.0°C to 42.0°C]
Detection time About 3-4 seconds
Display LCD
Memories: 9 memories
Power source Internal electric source: 1 X CR2032
Kind of sensor Infrared
Using conditions: temperature: +15°C ~ 40°C
humidity 10 ~ 80%RH
Transport and storage conditions: temperature: -20°C ~ 60°C
humidity 10 ~ 95%RH
Expected service life of device: about 3 years with a maximum of 2500 measurements.
