4
Packaging materials (plastic bags, cardboard, polystyrene, etc.) must never be left within reach of children, since they are potentially dangerous and must
be disposed of in accordance with current directives and legislation.
DESCRIPTION AND USE OF THE DEVICE
- Massage heads
- Straps
- Connector
- Network adapter
- Car adapter
DEMO button: if you press this button you will be given a brief demonstration of how the product works.
SHIATSU massage
FULL (to massage all of your back)
UPPER ( to massage the upper part of your back)
LOWER ( to massage the lower part of your back)
SWING massage
FULL (to massage all of your back)
UPPER ( to massage the upper part of your back)
LOWER ( to massage the lower part of your back)
SPOT buttons: (spot massages)
ROLLING massage
FULL (to massage all of your back)
UPPER ( to massage the upper part of your back)
LOWER ( to massage the lower part of your back)
WIDTH (adjustment of the width)
SEAT button: to switch the vibration massager on
POWER button: to switch the device on and off
HOW TO USE THE DEVICE
Position the massaging seat on a chair, armchair or similar, and secure it using the elastic straps provided. Insert the connector into the network adapter
and plug it into the power socket. The device may be also used in your car thanks to the car adapter provided as part of the package.
Press the POWER button to switch the device on. Select the settings as follows:
Press the SHIATSU button to start-up the shiatsu massager and select the area you wish to massage using the FULL BACK, UPPER BACK and LOWER
BACK buttons.
Vibration massage: press the VIBRATE button to start the massage. By doing so a continuous and intermittent massaging session will start with a high
intensity. Press the button again to set it on a medium or low intensity or to switch this function off. By doing so the LEDs that correspond to the different
intensities will switch on (H= high; M= medium; L= low).
Press the POWER button to switch the device off. The red led will start flashing to indicate that the massaging mechanism is returning to its initial position
before switching off. Take the plug out of the power socket.
Warning: For safety reasons the device automatically switches off after 30 minutes use. This procedure does not replace the device’s manual switching off
procedure. Always switch the device off when it is not being used and remove the plug from the socket.
MAINTENANCE AND STORAGE
Always detach the power cord before proceeding with cleaning the unit. Do not use any type of solvent to clean the appliance. Clean with a soft, slightly
dampened cloth, and never use detergents. Never immerse the appliance in water or any other liquid. Never use chemical detergents. Always store the
unit in a dry, well ventilated location, away from heat sources, direct sunlight, or sharp objects. Never coil the power cord around the appliance, and do not
use the power cord to hang up the unit.
SPECIFICATIONS
Description: massaging seat
Power: 36 W
Power supply: input DC 12V 2,5A
