GB
12
13
HOME MODE or AUTO MODE will turn off, after that TURN THE KNOB CONTROL
TO OFF TO TURN THE PRODUCT OFF.
“HOME” USE MODE
A) KEEP THE BABy BOTTLE WARM
B) RAPID BABy BOTTLE
HEATING/BABy FOOD HEATING
1. Set the switch located on the bottom
of the baby bottle to the “home” position
2. Set the control knob to the “OFF” position
3. Place the baby bottle on a flat and stable surface
4. Ensure that the power cable is unplugged from the power outlet
5. Verify that the car adapter is not plugged in
6. Place the baby bottle containing the milk in the bottle warmer
7. Fill the stainless steel tank with 65 ml of water for baby bottles or baby food
8. Insert the plug into the wall socket
9. Adjust the control knob to the desired position AS INDICATED IN THE FUNCTION
TABLE
10. The orange light indicates that the bottle warmer is heating up, when the control
light turns off, wait at least half a minute and remove the baby bottle
11. Switch the command dial to OFF to turn off the product
12. After waiting about half a minute for it to cool, remove the used water from the tank.
STERILISATION (100°C)
WARNING: WHEN STERILISING BABY BOTTLES OR ACCESSORIES, THE HOME OR
AUTO LIGHT SWITCHES OFF WHEN PRODUCT REACHES THE TEMPERATURE OF 100°
IN THIS CONFIGURATION, THE PRODUCT SWITCHES OFF ONLy AFTER HAVING EVA-
PORATED ALL THE WATER IN THE TANK.
After turning the product to OFF, and after waiting about half a minute for it to cool
and to avoid getting burned, remove the excess water.
Summary of Contents for JL- 976 PAPPERTUTTO
Page 67: ......
