5
Bullet Deep Vee
US 1 Catamaran
NOTE:
1. There is a water proof rubber ring placed along the slot of hull, always make sure it’s secured
positioned before re-position the upper deck.
TRANSMITTER/RECEIVER BINDING
The binding process effectively ties the transmitter and receiver together. Under normal circumstances, both
items are supplied like this from the factory. If, however, you find that your transmitter and receiver are not
bound(receiver’s red LED is on), you should do the following:
1) Switch “ON” the transmitter.
2) Switch “ON” the receiver by connecting battery to ESC,
and ESC cord is plug into Receiver properly(Note:ESC
has BEC function).
3) Press down the “BIND” button on the receiver, the
receiver’s green LED will be on to indicate that binding
has been successful and the receiver will now accept
commands from the transmitter.
Note 1: During binding process, transmitter and receiver should be no more than one meter apart and no other
similar devices should be within 10 meters.
Note 2: if the green light flashing, showing the binding failure, please do again as above indication.
Receiver connection diagram
Caution: Before racing boat,
Please use ballon supplied
in tool bag to wrap receiver
for water proof
Note: If ESC with BEC function, no need to connect battery with receiver.
BATT.(6V)
THROTTE
SERVO
ESC
NOTE:
We recommand you 2 packs of 7.4V 4000mAh 35C Lipo battery for maximum performance.
Using the Provided Hook and Loop which are already tied on the battery locators inside the
hull to tie the battery. The battery locators help align the batteries for the best running center
of gravity for maximum performance. Belowing are the batteries location inside the hull.
